Instructions & Tips
Initially setting up your Bow Watch is simple process.

When you first open the package, pull out the plastic
battery-saver tab from the side of the unit to activate
it. After 2 seconds, you will hear a beep and the time
will display 12:00. You are now ready to set the time
and other functions.
Note: After a few seconds of no button activity, Bow Watch will return to the main display mode automatically.
Instructions shown here assume you are beginning from the main display mode.

Setting the Time
    Press and hold SET for 2 seconds until the display flashes. Use ADJ to switch between 12hr and 24hr
    modes. Press SET again and the minutes will flash. Use ADJ to set the minutes. Press SET again and
    hour will flash. Use ADJ to set the hour. Press SET to save the hour and return to the main display mode.
Setting the Alarm modes
    Press MODE once to display the alarm settings. To change, press and hold SET for 2 seconds until the
    display flashes. Press ADJ to toggle through alarm settings and notice the small icons that are shown. A
    bell means the alarm is active for the time shown. A small dot surrounded by lines means the hourly alarm
    is active (Bow Watch will give a single beep each hour). Both icons shown means both are active. When
    the alarm mode is active (bell icon), pressing SET while time is flashing will move to the minutes. Use ADJ
    to set the minutes. Press SET again and hour will flash. Use ADJ to set the hour. Press SET again to
    return to the main alarm display mode.
Setting the Date
    Press MODE twice to display Month and Day. Press and hold SET for 2 seconds to display the year.
    While flashing, use ADJ to set the year. Press SET and month will be flashing. Use ADJ to set the month.
    Press set again and day will flash. Use ADJ to set the day. Press SET to save the date.
Showing High and Low temperature & humidity
    From the main display mode, press HI/LO to show high values. Press HI/LO again to show low values.
    These values remain unless Bow Watch is reset from removing the battery.

Refer to the instructions printed on your Bow Watch packaging for other functions and instructions.

TIP: For basic functionality and an easy way to set the time, pull the plastic battery-saver tab to activate your
Bow Watch precisely at 12:00. Your AM/PM will be backwards, but the time displayed will be correct!
Alternative Mounting and Usage Ideas
  • Replace the mounting tape with (or adhere to) a
    strip of Velcro to make a loop. Use this to fasten
    your Bow Watch to your clothing, backpack, or
    other gear.
  • Adhere your Bow Watch to an old keychain and
    hang from a hook or carabeener-style clip.
  • Does your ATV have a clock and thermometer?
    It does now, with Bow Watch!
  • Bow Watch makes a perfect accessory for your
    golf bag or golf cart.
Find a new way to use Bow Watch?
Let us know!